ODL-312
S/PDIF Optical to AES/EBU
The ODL-312 Digital Audio Interface by Hosa Technology allows simultaneous transfer between S/PDIF optical and AES/EBU digital audio formats. It is ideal for interconnecting digital audio workstations, recorders, and other digital audio gear regardless of I/O format. Features include:
• Two channels S/PDIF optical to AES/EBU and vice versa
• Simultaneous conversion in both directions if re […]
CDL-313
S/PDIF Coax to AES/EBU
The CDL-313 Digital Audio Interface by Hosa Technology allows simultaneous transfer between S/PDIF coax and AES/EBU digital audio formats. It is ideal for interconnecting digital audio workstations, recorders, and other digital audio gear regardless of I/O format. Features include:
• Two channels S/PDIF coax to AES/EBU and vice versa
• Simultaneous conversion in both directions if required […]
NBR-321
BNC to RCA
This adapter is designed to adapt a male BNC connector to an RCA jack. It is ideal for connecting pro video gear to consumer video components.
Connectors: BNC to RCA
NFF-339
F to Same
These adapters are designed to couple 75-ohm coax with F connectors.
Connectors: F to Same
PWP-461
IEC C7 polarized to NEMA 1-15P
This cable is designed to connect an electrical appliance with a polarized C8 inlet to line power. It is ideal for use with vintage hi-fi components. Features include:
• Oxygen-Free Copper (OFC) conductors for lower resistance and increased current flow
• Black PVC jacket for durability, flexibility, and low visibility
• Intended for use in North America and nations that have adopted th […]
XRR-318F
Right-angle XLR3F
This connector is designed to terminate single-pair cable for balanced mono applications. It is ideal for use with line-level signals.
Connector: Right-angle XLR3F
XRR-318M
Right-angle XLR3M
This connector is designed to terminate single-pair cable for balanced mono applications. It is ideal for use with line-level signals.
Connector: Right-angle XLR3M
PHX-300F-BULK
Phoenix 3-pole Female, Strain Relief
This connector is designed to terminate single-pair cable for balanced mono applications. It is ideal for use with line-level signals and features molded strain relief for added protection.
Connector: Phoenix 3-pole Female
MPA-149
XLR3F to XLR3M
The MPA-149 is an active, in-line mic preamp that provides +26dB of gain to any low-output dynamic, or passive ribbon microphone. The MPA-149 utilizes a discrete Class-A circuit design and selected FET circuitry to offer a clean signal path and low-noise operation. Its compact metal housing is designed to perform reliably in any environment.
Where increasing the gain on consoles, interfaces, o […]
GPP-296
1/4 in TS to Same
This adapter is designed to couple guitar pedal effects with equal jack placement, shortening your signal chain as much as possible.
Connectors: 1/4 in TS to Same