Item added to cart ×
Continue Shopping View Cart

Y Cable Vs. Stereo Breakout Cable

Y Cable Vs. Stereo Breakout Cable

The Y cable earned its name from the way it looks. There is a single connector on one end with a cable that splits, either as a zip cable or with a small box that conceals the split, and finishes with two connectors at the other end. A stereo breakout meets this same visual description and yet does not perform the same way as the typical Y cable. Let’s take a look at the difference between the two.

What is a Y Cable?

The function of a Y cable is to duplicate a single audio signal into 2 identical audio signals. The two signals can be connected to two new destination devices. A Y cable can also be used to change the connector type to avoid using a Y cable plus connector adapters in the same chain.

A Y cable is used when there is one signal that must go to two different places. For example, when you have one 1/4-inch TRS headphone output and you want two people to listen to the same thing on their own headphones with 3.5 mm connectors. The quickest solution to this problem would be a Y cable with a single 1/4-inch TRS male to dual 3.5 mm TRS female jacks. Each of the two headphones will get exactly the same signal. The cable is wired so each contact on the single end connects to the equivalent contact of each connector on the dual end. Be advised that a traditional Y cable is designed specifically to split a signal. Using a Y cable to combine two signals is not recommended because you have no control over the way the signal is combined.

What is a Stereo Breakout Cable?

As opposed to a Y cable that duplicates a single input, a stereo breakout cable will take a single connector stereo output from a device and separate the left and right signals into their own connector. Much like a Y cable, the connectors at the two ends of the stereo breakout cable can vary to eliminate the need for adapters.

A common situation requiring a stereo breakout is playing music from an iPod® through an audio mixer with 1/4-inch TS inputs. The solution is a 3.5 mm TRS to dual 1/4-inch TS stereo breakout cable. You connect the 3.5 mm end to the iPod and on the other end you’ll have the left signal (tip of the connector) on one of the 1/4-inch connectors and the right signal (ring of the connector) on the other, allowing you to connect each to its own input on the mixer. When used properly, a stereo breakout can be used in either direction. You could use the same breakout from the previous example to take the left and right outputs of a mixer and connect them to a laptop equipped with a 3.5 mm stereo input.

TRS vs TS Cable

Before making a purchase, it’s important to know what type of inputs and outputs you need. TRS stands for Tip, Ring, Sleeve. These cables are known as balanced, or stereo. They can either carry a single balanced signal or separate left and right signals in a single cable. TS stands for Tip, Sleeve. These are unbalanced, or mono cables and only carry one signal. While most modern equipment will have TRS inputs and outputs, there’s still lots of equipment that may require separate left and right inputs, which requires splitting that TRS into two TS connections.

It’s important to know what you need to accomplish in order to select the right cable. Hopefully this has shed some light on these common audio problem solvers so that you can always make the right choice. Check out Hosa’s Y Cable and stereo breakout selection to find your perfect cable.

- Jose

We Have A New Website

Welcome to the first blog post on the new hosatech.com. We are very excited to share the new website with you. If you were familiar with our previous site, you’ll find a fair amount of similarities here. However, there are also some significant improvements, additions, and overall changes. We would like to take this opportunity to share some of the new features, hopefully answering a few of your questions along the way.

This may come as a surprise to you, but we use the site, too. In fact, some of us utilize it on a daily basis. This means that functionality and ease of use are just as important to us as they are to you. For this reason, we made sure to incorporate a responsive design. This enables you to quickly access information and have an enjoyable browsing experience whether you are on a desktop, laptop, tablet, or smart phone. No more constant zooming in and out on your mobile device just to find a product.

Speaking of products, it’s pretty well known that Hosa makes a lot of them. Our catalog has over 1,100 individual part numbers! The vast majority of those items are cables. The new mega menu and product pages make it easy to browse through our catalog, but what if you are looking for a specific cable and already know what connectors you need? Enter the new Hosa Cable Finder. Regardless of whether you know which category to look in, you can quickly and easily find the right cable with just 3 simple steps.

Now that you know a couple different ways to find the products you are looking for, it’s time to purchase them. You may have already noticed there is no shopping cart on the new site. Over the years, we have worked very hard to establish relationships with the top resellers in the music, pro audio, and electronics industries. Whether you want the face-to-face interaction of a local store or prefer the convenience of online shopping, there is an Authorized Hosa Reseller waiting to provide you with the superior customer experience you deserve. Even outside the USA, our distribution partners share our vision of providing connectivity solutions for everyone.

Hopefully this has given you some insight into the new website, but the best way to get the lay of the land is to just explore it for yourself. We plan to use this blog as a way of sharing more and more about our products and our company. Keep an eye out for future blog posts on various topics including tips on how and why to use certain products, spotlights on members of the Hosa team, upcoming events where you can hang out with us, and more.

- Kyle

Hosa Celebrates 30th Anniversary

Transition to new leadership and a pinpoint focus on connectivity solutions highlight company’s agenda

Buena Park, CA – March 2014… Hosa Technology, the leading innovator of analog and digital connectivity solutions for music, sound, and A/V professionals, is pleased to announce the company’s 30th anniversary. From its humble beginnings in 1984, company founder Sho Sato has built Hosa into an internationally recognized organization that provides an expansive range of products for various industries. What began as a single-page catalog of audio interconnects and adaptors now encompasses most—if not all—audio cables and adaptors, a growing assortment of data and video cables, wireless microphones, stands, and much more. The 30th anniversary celebration kicked off at January’s Winter NAMM Show with a focus on the company’s leadership transition to new CEO Mayumi Martinez.

On opening day of the 2014 Winter NAMM Show in Anaheim, CA, Hosa commemorated its 30 years in business by inviting its longest-standing dealers, including Sweetwater, Sam Ash, American Musical Supply, Alto Music, and numerous others, for a momentous toast. During this gathering, Martinez reiterated the company’s focus on providing the best cables and connectors to the industry. “I’ve always been attracted to the opportunity to take what my father built from the ground up and elevate it,” says Martinez. “While I can’t replace his 47 years of knowledge in pro audio, I’m very fortunate to have a great team behind me with the technical expertise required to maintain our focus, which remains ensuring Hosa’s success as a leading provider of cables, adaptors, and other connectivity products.”

Hosa Technology has grown considerably during its three decades of operation. The company currently employs 40 people, ranging from customer service to sales and marketing, product development, shipping and receiving, and administration. The company’s main office and warehouse are located in Buena Park, CA, but recently a second warehouse was opened in Taiwan to cater to the company’s international customers. In addition, Hosa works with a total of 20 sales rep firms to support its domestic and international efforts.

Stemming from her family’s competitive nature, Martinez said her goal for Hosa over the next five years is to double the company’s sales, which means expanding beyond MI and pro audio, and adding more technology cables. She also plans to expand Goby Labs and Mogan Microphones, Hosa’s other key brands. “My goal is to make Hosa the go-to brand for professional connectivity products,” Martinez explained. “Everyone needs HDMI®, USB, and other technology cables, but pros are often forced to use consumer-grade products. I believe Hosa can excel in that niche, with cables built for the jobs at hand.”

As Hosa looks forward, Martinez sees the company’s largest areas of growth to be in the AV integration industry, bridging the gap between audio and video. “AV integration is bringing audio and video closer together, and many dealers that have traditionally focused on video and consumer electronics are bringing pro audio to a larger market than ever,” Martinez said. “Since the DSLR camera has become the go-to tool for videographers, even camera stores are carrying an ever-increasing selection of Hosa pro audio products.”

“The evolution of Hosa Technology to its present day status is an accomplishment my father and I are extremely proud of,” Martinez concludes. “Over the years, Hosa has grown to reflect the diverse nature of the music and sound industry. The people who work here are like family. Without their effort and dedication, the company’s growth and success would not have been possible. Looking forward, I envision even greater opportunities as we strive to provide the music, sound, and A/V professional with the best tools available to help make their aspirations a reality.”

- Hosa

Announcing New Edge Series Microphone, Guitar and Speaker Cables

New flagship cable products employ state-of-the-art materials and workmanship

Buena Park, CA – January 2014… Hosa Technology, the leading innovator of analog and digital connectivity solutions for the modern musician, is pleased to introduce the Edge Series cable products. Featuring genuine Neutrik connectors, Oxygen-Free Copper (OFC) conductors, and world-class workmanship, Hosa Edge cables—the company’s flagship cable line—provide musicians and audio professionals with the finest signal transport means available. And because Hosa Edge consists of microphone, guitar, and speaker cables, it can be used along the entire signal chain, ensuring one’s music will retain all the clarity and punch of the original sound.

Hosa Edge Microphone Cables proudly utilize Neutrik XX-series connectors. Manufactured with gold-plated contacts for corrosion resistance, a Zinc die-cast housing for rock-solid reliability, chuck-type strain relief for maximum cable retention, a boot with a polyurethane gland to prevent cable kinking, and an ergonomic design that ensures easy handling, Neutrik connectors are the ideal terminations for a cable designed to provide stellar performance and durability. Hosa Edge Microphone Cables employ 20 AWG Oxygen-Free Copper (OFC) conductors along with polyethylene dielectrics and a 95% OFC braided shield. This reduces resistance and capacitance for maximum signal transfer and crystal-clear high frequency transmission while providing maximum noise rejection.

Many of the performance attributes of the Hosa Edge Microphone Cables can be found on the line’s guitar cables as well. Hosa Edge Guitar Cables utilize genuine Neutrik X-series plugs, which employ precision machined, one-piece contacts for signal integrity and structural rigidity. Like the Edge Microphone Cables, these guitar cables feature gold-plated contacts, a Zinc die-cast housing, chuck-type strain relief, a boot with a polyurethane gland, and an ergonomic design that ensures easy handling. Further, the Edge Guitar Cables incorporate 20 AWG Oxygen-Free Copper (OFC) conductors, a 95% OFC braided shield, and conductive PVC.

Like the Hosa Edge Microphone and Guitar Cables, the new Edge Speaker Cables employ Neutrik connectors that offer precision machined, one-piece contacts for signal integrity and structural rigidity, chuck-type strain relief, and a sleek, ergonomic design. These speaker cables utilize 12 AWG Oxygen-Free Copper (OFC) conductors that reduce resistance and provide maximum signal transfer. Further, they are manufactured with a PVC jacket that adds durability, remains flexible, and reduces the visibility of the cable.

Jose Gonzalez, Hosa Technology’s Product Manager, commented on the company’s new Edge Series cables. “Transmitting sound from its source to the audience with minimal signal loss is absolutely crucial,” says Gonzalez, “and this mandate is precisely what the new Hosa Edge Series is all about. Someone at the beginning of the signal chain poured their heart and soul into their music, and the music must reach the crowd with the same quality and impact as originally created. Unfortunately, the quality of the cable that transports one’s signal is often overlooked. With the new Edge Series, all of us at Hosa are confident the music will be delivered exactly as it’s supposed to be.”

Hosa Technology’s new Edge Series cables will all be available in a variety of cable lengths. MSRP of the Edge Series Microphone Cables will range from $45.45 – $145.80 while the Edge Guitar Cables are priced from $46.50 – $81. The Hosa Edge Speaker Cables will carry pricing from $37.65 – $232.50. Hosa’s Edge Series microphone, guitar, and speaker cable products are expected to become available by March 2014.

- Hosa

Hosa Debuts SuperSpeed USB 3.0 Cables

Up to ten times faster than USB 2.0

Buena Park, CA – November 2013… Hosa Technology, the leading innovator of analog and digital connectivity solutions for the modern musician and audio/video professional, is pleased to announce the introduction of the USB-300 Series SuperSpeed USB 3.0 cables. Featuring data transfer rates up to ten times faster than USB 2.0, new SuperSpeed USB cables are ideal for DJ’s, musicians, and audio professionals seeking to maximize the performance of their equipment, including portable disk drives, recording and playback systems, cameras, and more.

Available in 3-, 6-, and 10-foot lengths, Hosa’s new SuperSpeed USB cables are available in two configurations: (1) the traditional Type A to B option commonly used to connect a PC to an audio interface, external hard drive, or similar device and (2) the Type A to Micro-B connector that can be found on DSLR cameras, smart phones, tablets, and portable drives. Regardless of the connector type, Hosa SuperSpeed USB cables are fully compliant with USB 3.0 specifications, providing transfer rates of up to 5 Gbps and increased power handling capabilities.

As is the case with all Hosa products, the materials and workmanship used in the manufacturing of the SuperSpeed USB cables is first rate—ensuring optimum performance for a wide range of applications. All Hosa USB-300 Series SuperSpeed USB cables utilize Nickel-plated plugs for enhanced signal transfer and an Aluminum-Mylar shield for superior EMI and RFI rejection, making these cables an outstanding choice for connecting an audio interface, USB microphone or instrument, or computer peripherals to newer generation PCs.

Jose Gonzalez, Hosa Technology’s Product Manager, commented on the company’s new SuperSpeed USB 3.0 cables, “Our new SuperSpeed USB cables provide DJ’s, musicians, and audio professionals with a valuable means of making connections with the latest equipment to capitalize on the increased bandwidth provided by the USB 3.0 specification. USB 3.0 grants users the ability to transfer data at faster rates than ever before—at speeds up to ten times faster than USB 2.0—with significantly improved power capabilities so your devices are always fully charged when needed. With a good selection of cable lengths and connector options designed to fit any USB 3.0 device, I’m confident these new USB cables will be well received by our industry.”

The new Hosa USB-300 Series SuperSpeed USB 3.0 cables are expected to become available in December 2013. MSRP pricing is as follows:

Model Description MSRP
USB-303AB SuperSpeed USB Cable, Type A to Type B, 3 ft $11.10
USB-306AB SuperSpeed USB Cable, Type A to Type B, 6 ft $14.10
USB-310AB SuperSpeed USB Cable, Type A to Type B, 10 ft $17.25
USB-303AC SuperSpeed USB Cable, Type A to Micro-B, 3 ft $22.95
USB-306AC SuperSpeed USB Cable, Type A to Micro-B, 6 ft $25.05
USB-310AC SuperSpeed USB Cable, Type A to Micro-B, 10 ft $27.00
- Hosa

Goby Labs Debuts New Tablet Frame Thingy Deluxe

Now supports iPad® and iPad mini® tablets on stage or music workstation

Buena Park, CA – October 2013… Goby Labs, dedicated to bold innovation in the areas of musical instrument accessory products, is pleased to announce the introduction of the Goby Labs Tablet Frame Thingy Deluxe. The ideal solution for providing support for one’s tablet—be it on stage, in the studio, or anywhere else—the new Tablet Frame Thingy Deluxe includes new clip kits that enables the tablet frame to hold second generation or newer iPads or the iPad mini and includes a base that makes it ideal for stage or desktop use.

Apple’s iPad has found its way into the lives of people everywhere and has become a fixture among musicians in recording studios, rehearsal rooms, live stages, and in music education. With its ability to address such a wide range of applications spanning everything from being a convenient means to capture ideas, keep lyrics close at hand, and much more, the iPad is now a common sight among musicians.

Whereas the original Tablet Frame Thingy was designed to support the first generation iPad on a standard microphone stand, the new Tablet Frame Thingy Deluxe goes one step further by including a base that is designed to support the tablet on a desk, road case, or any other surface that might serve as a table. As with the original Tablet Frame Thingy, the new Tablet Frame Thingy Deluxe incorporates Goby Labs’ unique patent-pending closed-loop pole grip that ensures tight, secure placement for one’s valuable tablet. And when it’s time to place the tablet on a desk or similar surface, simply bolt the open end of the steel tube to the included desktop base and adjust the orientation using the thumb-release ball joint mechanism for precise placement.

Owners of second generation or newer iPads and the iPad mini will certainly appreciate the fact that the new Goby Labs Tablet Frame Thingy Deluxe includes clip kits that enables the tablet frame to support these newer generation tablets. Combined with the included base, iPad owners now have a versatile, rugged solution to support their treasured tablet in a myriad of environments.

As the mad scientists at Goby Labs are sequestered in their underground laboratory, Hosa Technology’s Vice President of Sales and Marketing, Jonathan Pusey, was strong armed into providing his thoughts about the new Goby Labs Tablet Frame Thingy Deluxe. “We always insist that our engineers listen to the input of our customers and, in doing so, I believe we’ve created an exceptionally useful second generation tablet support system,” said Pusey. “With the addition of the new base attachment, iPad users can now have one stand that easily traverses the gap between use at home and on stage. And with the new clip kits for iPad mini in addition to the current iPad clip kit, this system presents a strong, sure-footed stand solution that is supported by steel components throughout—further ensuring rock solid stability.”

The Goby Labs Tablet Frame Thingy Deluxe (Part Number: GBX-310) is available now and carries a MSRP of $54.95.

- Hosa

Hosa Announces New Mogan Elite ICE Omni Earset Microphone

Full frequency vocal reproduction with an all-but-invisible fit

Buena Park, CA – September 2013… Hosa Technology, the leading innovator of analog and digital connectivity solutions for the modern musician and audio/video professional, is pleased to announce the new Mogan Elite ICE Omni Earset Microphone. As the newest addition to the Mogan Microphones brand of subminiature microphones, the new Mogan Elite ICE builds upon the strengths of the original Mogan Elite Earset Microphone while taking fit and appearance to an entirely new level. Designed to deliver full-frequency vocal reproduction for the most discerning presenter or performer, the new Mogan Elite ICE Earset Microphone is a terrific choice for broadcasters, theatrical performers, church worship leaders, and other professionals seeking exceptional audio performance while taking advantage of the microphone’s all-but invisible appearance.

At the heart of this outstanding microphone is a moisture-resistant, 2.5 mm Omni-directional capsule with -45 dB nominal sensitivity that is designed to be positioned farther from one’s mouth. Delivering full-frequency audio performance (20 Hz – 20 kHz) with a maximum SPL rating of 140 dB and high gain before feedback, this microphone delivers the natural, resonant sound quality that is required for on-air applications and critical, live sound reinforcement tasks, including vocal reproduction in a theatrical environment.

For those seeking an earset mic with an uncommonly discreet visual appearance, the new Mogan Elite ICE is the ideal choice. Featuring the new Invisi-Clear Earpiece (ICE)—the industry’s only transparent earpiece—the Mogan Elite ICE provides low visibility on stage or on camera by blending with the user’s skin tone. In addition to the comfort and security provided by the hypoallergenic Mogan earpiece, the Elite ICE microphone offers a thin, strong boom that can be positioned on the user’s left or right side and adjusted to the contours of any face. The end result is a microphone that provides an unmatched combination of pristine sound, low visibility, and superior comfort.

The new Mogan Elite ICE Omni Earset Microphone can be used with a variety of interchangeable cables that enables one to connect the microphone to most popular wireless transmitters, including models from Shure, AKG, Sennheiser, and Audio Technica. Each microphone ships with a detachable, Kevlar®-reinforced cable with a hardwired connector.

The new Mogan Elite ICE Omni Earset Microphone ships with a beige boom to blend with a variety of skin tones. Additionally, the system package includes a foam windscreen and a single cable clip and ships in an impact-resistant, specially designed aluminum case.

Jose Gonzalez, Hosa Technology’s Product Manager, commented on the new Mogan Elite ICE Omni Earset Microphone. “The Mogan Elite ICE earset microphone delivers exceptional performance that enables the mic to be right at home in a variety of high-end applications, including broadcast and theater. In addition to its stellar audio quality, the microphone’s transparent earset is both very comfortable to wear and, from a visual perspective, blends seamlessly with any skin tone. The hypoallergenic earpiece is highly adjustable and the boom mechanism facilitates precise positioning of the microphone’s capsule. I genuinely believe this newest member of the Mogan microphone line will find its rightful place among numerous mission critical audio applications.”

The Mogan Elite ICE Omni Earset Microphone is available now. MSRP is $400.

- Hosa

Hosa Announces Audio Engineering Scholarship at Musicians Institute

Buena Park, CA – September 2013… Hosa Technology, the leading innovator of analog and digital connectivity solutions for the modern musician and audio/video professional, is pleased to announce the formation of the Hosa Technology Audio Engineering Program Scholarship at Musicians Institute in Los Angeles. The scholarship will first be awarded in Fall 2013 to a new student enrolling in the MI Audio Engineering Program who clearly articulates their career goals in the music industry, as well as why they should be considered for the scholarship, in a 500 word essay.

The Hosa Technology Audio Engineering Program Scholarship is available to students enrolled in the Audio Engineering Program only. The award constitutes a $1,000.00 tuition credit ($1,000.00 per quarter for the first quarter of the program, as long as the recipient maintains satisfactory progress). The scholarship recipient will also receive a voucher for $250 worth of Hosa products at retail value. The recipient of the Hosa Technology Audio Engineering Program Scholarship must maintain full-time enrollment status (12 units) during the full length of the award period.

Beth Marlis, Vice President of Industry and Community Relations at Musicians Institute and Executive Director of The Musicians Foundation, reflected on the formation of the Hosa Technology Audio Engineering Program Scholarship and its significance to potential candidates, “All of us at Musicians Institute are delighted to have the support of Hosa Technology. A scholarship program of this nature can make a considerable difference in a student’s ability to pursue their musical aspirations. As a recognized industry leader, Hosa’s products play an integral role in today’s music—both in terms of studio production and live performance. I’m confident this new scholarship program will be tremendously beneficial.”

Mayumi Martinez, CEO of Hosa Technology, echoes Marlis’ enthusiasm. “Musicians Institute is a vital link in the education of up and coming musicians and audio engineers, and we are very pleased to offer our support to those students deserving of financial assistance,” Martinez states. “Over the years, Hosa has been fortunate to gain a loyal following and be positioned as a leading provider of connectivity solutions to the music and sound industry. I believe our participation in this endeavor allows us to give back to the community while investing in the next generation of music and audio professionals. We look forward to a long, mutually beneficial relationship with Musicians Institute.”

- Hosa

Hosa Announces New High Speed Micro HDMI Cable

HDMI to Micro HDMI connectivity with support for full 1080p HD signals and beyond

Buena Park, CA – August 2013… Hosa Technology, the leading innovator of analog and digital connectivity solutions for the modern musician and audio/video professional, is pleased to announce Hosa High Speed Micro HDMI® Cables. Certified to carry an HD signal up to 1080p and beyond, the new Hosa High Speed Micro HDMI Cables are ideal for use with portable video cameras and electronic tablets.

Featuring HDMI to Micro HDMI connectivity, the new Hosa High Speed Micro HDMI Cables are designed to interconnect devices with Micro HDMI outputs to devices with HDMI inputs. The cables are perfect for playing back recorded footage from portable digital devices such as the popular GoPro® video cameras, as well as many other video cameras and electronic tablets.

Among their many features, the Hosa High Speed Micro HDMI Cables are ideal for 720p / 1080i signals that are capable of increased refresh rates (above 60 Hz) or Deep ColorTM. Fully backward compatible with all Standard HDMI interfaces, Hosa’s High Speed Micro HDMI Cables support the maximum single-link bandwidth of 340 MHz (10.2 Gbps) and fully support uncompressed 7.1 digital audio up to 192 kHz. To ensure years of dependable service, the Hosa High Speed Micro HDMI Cables feature gold-plated plugs for corrosion resistance and superior signal transfer.

Jose Gonzalez, Hosa Technology’s Product Manager, commented on the company’s new High Speed Micro HDMI Cables, “HDMI has given consumers the ability to eliminate a significant amount of cable clutter in entertainment systems. HDMI is, without question, the best audio and video signal transmission method to get high definition video and surround sound from one’s source device, such as a Blu-ray disc player, to the screen and loudspeakers. Advances in technology since the release of HDMI have made it possible to record high definition video utilizing small camcorders or stream HD video right to electronic tablets. The key to these devices is portability and the amount of available connector real estate is extremely limited. As a result, the Micro HDMI connector is the ideal size for most of these devices and it still provides the full set of HDMI features. By offering HDMI to Micro HDMI connectivity, our new cables are the perfect match for many of today’s consumer electronics products.”

Hosa’s High Speed Micro HDMI Cables are available now. MSRP pricing for the three available cable lengths is as follows:

Description MSRP
High Speed HDMI Cable, HDMI to Micro HDMI, 3 ft. $18.30
High Speed HDMI Cable, HDMI to Micro HDMI, 6 ft. $20.40
High Speed HDMI Cable, HDMI to Micro HDMI, 10 ft. $23.40
- Hosa

Hosa Technology Gains ISO 9001:2008 Certification

The benchmark for quality management ensures highest levels of customer satisfaction

Buena Park, CA – July 2013… Hosa Technology, the leading innovator of analog and digital connectivity solutions for the modern musician and audio/video professional, is pleased to announce it has received ISO 9001:2008 certification. As the world’s largest developer of voluntary International Standards, ISO certification helps make industry more efficient and effective. Developed through global consensus, the requirements for certification help to break down barriers to international trade by ensuring the highest corporate standards for products, services, and good practice.

Hosa’s ISO project commenced in May 2012 and the company obtained certification on June 20, 2013. As part of the certification procedure, Hosa underwent three stages of external audits to evaluate its core business processes. In each case, the company was found to be compliant to the ISO standard. ISO 9001:2008 sets out the criteria for a quality management system and is the only such standard that can be certified. It can be used by any organization, large or small, regardless of its field of activity. The standard is based on a number of quality management principles including a strong customer focus, the motivation and implication of top management, the process approach, and continual improvement. ISO 9001:2008 is implemented by over one million companies and organizations in over 170 countries.

BSI Group was the registrar that conducted the audits leading to Hosa’s ISO 9001:2008 certification. BSI Group, which provides testing and certification of products and services, has grown into a leading global independent business services organization providing standard-based solutions in more than 140 countries. BSI Client Manager Brian Vaden oversaw Hosa’s ISO 9001:2008 certification process.

Upon receiving certification, Hosa Technology CEO Mayumi Martinez offered the following comments, “Hosa Technology is committed to providing high-quality products that meet or exceed our customers’ expectations through unparalleled value, industry-leading customer service, and continual improvement of our business processes. We are very proud to receive ISO 9001:2008 certification and we genuinely believe that in receiving certification, we ultimately benefit our customers by providing them with the finest products and superior service.”

- Hosa